Ultra USB Motion Sensor Rechargeable Wall Light - Final Sale
Vendor:
Free US Shipping Orders $45+
Regular price
€21,95 EUR
Sale price
€21,95 EUR
Regular price
€75,95 EUR
Specifications & Details
Frequently Asked Questions
Is this Ultra USB Battery Rechargeable Wall Light bright enough for hallways and stairs?
Yes. The Ultra USB Battery Rechargeable Wall Light delivers usable corridor and stair illumination thanks to its 740 lumens output and warm white color temperature of about 2700K to 3000K. The motion sensor activates the lamp only at night and the light auto shuts off after 15 to 30 seconds of no motion, which preserves battery while providing brief, effective visibility for steps and passageways. This light is best for secondary lighting in hallways, stair landings, and entryways where momentary illumination is needed rather than continuous room lighting. It is not intended to replace a primary ceiling fixture for a large open stairwell, but it is ideal for improving safety and orientation in narrow or frequently used paths.
Will this light work well inside closets and cabinets?
Yes. This rechargeable wall light is well suited for closets and cabinets because it is compact, wireless, and designed for surface mounting on flat, smooth surfaces using the included 3M double-sided adhesive pad. The motion sensor detects movement up to 7 to 10 feet and only illuminates at night or in low light, which makes it practical for small enclosed spaces where you want hands-free lighting. The unit is battery powered with a 500mAh lithium cell and includes a USB charging cable, so you can avoid hardwiring or drilling in rented spaces. Note that the adhesive requires a clean, flat surface for best adhesion and may not adhere reliably to textured or irregular finishes.
How long does the battery last between charges?
It depends on how you use the light. The unit uses a 500mAh rechargeable lithium battery, and power draw varies by mode: permanent light mode consumes the most power while intelligent induction mode conserves energy through automatic 15 to 30 second shutoff after motion ends. Because manufacturer runtime in hours is not specified, actual battery longevity between charges will vary with activation frequency and whether you run it continuously. Charging is via the included USB cable at 5V, which allows convenient topping up from wall adapters or USB power banks. For most motion-activated home uses such as night passages and closets, users typically experience substantially longer intervals between charges compared with continuous operation.
Is the light easy to install and remove for renters?
Yes. Installation is straightforward and renter friendly because no electrician or wiring is required. The package includes a 3M double-sided adhesive pad for surface mounting and the lamp is wireless and battery powered, so you simply press it onto a clean, flat surface. The unit is also detachable and can be used as a portable light when removed from its mount, which adds flexibility. For removal, gently peel the adhesive from the surface and clean any residue; the adhesive works best on smooth, non-porous surfaces and may not stick well to highly textured walls. If you need repeated relocation, consider using removable command-style strips that match the mounting weight.
Can I use this light in bathrooms or outdoors?
Not recommended for prolonged exposure to moisture or direct outdoor conditions. The light is built for indoor use and the product description does not list an IP water resistance rating, so it should be kept away from direct spray or locations that are frequently wet. It does have a wide operating temperature range from minus 20 to 40 degrees Celsius, which means it can tolerate cold and warm indoor environments, and it carries safety certifications such as CCC, CE, CQC, and EMC. For bathrooms, place it in dry zones or well-protected areas away from shower spray. For outdoor or wet locations choose fixtures specifically rated for those conditions.
How does the motion sensor work and what is the detection range?
The sensor uses a pyroelectric infrared detector and works in a human body plus light dual-induction mode, meaning it looks for motion and low ambient light before switching on. Detection range is specified up to 7 to 10 feet, and the lamp only activates at night or in dim conditions to avoid unnecessary triggers during daylight. The light then automatically shuts off after 15 to 30 seconds with no further motion to conserve battery. This setup benefits night-time navigation in hallways, bedrooms, and entryways and is especially useful for parents, older adults, and renters who need hands-free illumination. It is not designed for long-distance security detection or continuous monitoring.
Is the lamp rechargeable and how do I charge it?
Yes. The lamp is rechargeable and includes a 500mAh lithium battery along with a USB charging cable. The operating voltage for charging is 5 volts, so you can recharge it from common USB power sources such as wall adapters, computer USB ports, or power banks. The product specification does not list a precise full-charge time, so charge duration will depend on the power source amperage. Charging via standard USB ports is convenient and removes the need to replace disposable batteries. Keep in mind that using permanent light mode will require more frequent charging than motion-activated use.
Can I detach this light and use it as a flashlight?
Yes. The Ultra USB Battery Rechargeable Wall Light is designed to be detachable and function as a portable light source. The unit mounts to a base with a self-adhesive pad and can be removed to carry as a small handheld lamp or emergency flashlight. Its compact dimensions and included USB cable make it convenient for temporary use around the home, in a car, or during power outages. While handy for short-term portable lighting, it is not intended to replace purpose-built rugged outdoor flashlights and does not list a weatherproof rating, so avoid exposing it to heavy moisture when used outside of its mount.
What are the materials and safety certifications for this light?
The product is constructed from acrylic, wood accents, and PVC, combining a contemporary aesthetic with practical lightweight materials. It has several safety and compliance certifications, including CCC, CE, CQC, and EMC, and the LED element has a listed design life of about 10,000 hours. The lamp operates between minus 20 and 40 degrees Celsius and runs on a 500mAh rechargeable lithium battery at a 5 volt charging voltage. These facts make it suitable for consumers seeking an indoor, energy-efficient lighting solution with recognized safety approvals. If you need fixtures for wet or outdoor spaces, select products with the appropriate IP rating.
Will this adhesive-mounted light damage paint or leave marks when removed?
Possibly, depending on your wall finish and how long the adhesive remains in place. The light uses a 3M double-sided adhesive pad that is strong and intended for secure surface mounting; on clean, flat, and smooth surfaces it commonly removes cleanly, but on delicate paints, textured surfaces, or wallpaper it may lift paint or leave residue. To minimize risk, clean the mounting area first, test the adhesive in an inconspicuous spot, and consider using removable adhesive strips rated for painted walls if you are concerned. If residue remains after removal, use a gentle adhesive remover or warm soapy water to clean the surface, taking care to follow paint manufacturer recommendations.
